Products & Services
HDMI
The HDMI Specification combines uncompressed high-definition video, multi-channel audio, and data in a single digital interface to provide crystal-clear digital quality over a single cable. Simplay Labs has developed products specifically designed to test for HDMI compliance and interoperability.Jump To
- SL-889 HDMI 2.1 Cat-3 Cable EMI Tester
- SL-870 eARC Protocol Analyzer
- 6G HDMI/MHL Audio and Video Generator/Analyzer
- SL 309 Simplay CEC Explorer Development Tool
- Ordering Information
SL-889 HDMI 2.1 Cat-3 Cable EMI Tester
SL-889 HDMI 2.1 Cat-3 Cable EMI Tester
SL-889 HDMI 2.1 Cat-3 Cable EMI Tester
The SL-889 HDMI 2.1 Cat-3 Cable EMI Test Tool is designed to validate HDMI Category 3 cables for EMI compliance with the latest High Definition Multimedia Interface (HDMI) 2.1 Specification. This tool has been approved by the HDMI Forum Board of Directors for its use in certification of EMI compliance of Ultra High Speed HDMI cables. The SL-889 is developed to provide a calibrated source and reception sink of an actual HDMI 2.1 signal to be used to test radiated emission levels of HDMI cables for compliance. The SL-889 is meant for use in EMI test chambers that can perform CISPR-32 test scans.
Key Features
- LCD Display
- Front panel Rx and Tx DUT connections
- Rotary dial for selection of desired video resolution
- Calibrated HDMI output level for both TMDS and FRL output
- Support for multiple TMDS and FRL link rates
FRL Resolution Link Rate 3840x2160p60 6 Gbps 4-Lane 3840x2160p60+eARC 12 Gbps 4-Lane + 98Mbps eARC TMDS Resolution Link Rate 720x480p60 8-bit 27 MHz 720x480p60 12-bit 41 MHz 1920x1080p60 8-bit 148 MHz 1920x1080p60 10-bit 185 MHz 3840x2160p24 8-bit 297 MHz 3840x2160p60 8-bit 594 MHz - ITU-R BT.1729 Test Pattern with moving element
- Optional Monitor output for Pre-Test display of test pattern
- Rugged Low Noise Construction
- Supplied with 2-meter golden cable and reference scan from actual EMI chamber
- Shielded Ethernet port for field upgrades
- 12V 2A DC power
SL-870 eARC Protocol Analyzer
HDMI 2.1 eARC CTS Protocol Analyzer Test Tool
The SL-870 eARC Protocol Analyzer is designed to validate source and sink devices for compliance with the latest High Definition Multimedia Interface (HDMI) 2.1 eARC Specification. It supports end user requirements for interoperability and compliance of eARC devices with HDMI 2.1 CTS Test Specification. The analyzer is essential for debugging interoperability issues between eARC devices and can also be used as an eARC audio transmitter or receiver.
Key Features
- Required by Keysight and Tektronix’s for their Electrical MOI test
- Generates and receives eARC Data Streams
- Supports HDMI 2.1 eARC Transmitter devices
- Supports HDMI 2.1 eARC Receiver devices
- Comprehensive coverage of HDMI 2.1 CTS eARC Protocol tests
- Windows PC GUI application with USB connection
- Individual and Batch test modes
- Built-in CDF generator or load from Excel file
- Detailed log with summary report to help root cause issues
- Supports eARC audio transfers including
- Uncompressed 2-channel and multi-channel LPCM streams
- Compressed Dolby© and DTS© multi-channel streams
- User supplied audio streams
- Supports capture and display of eARC control channel information including:
- Timing of common mode channel activity
- Decoding of eARC control channel messages
- Validates ARC fall-back mode
CTS Testing Support
The SL-870 supports comprehensive operational testing of the eARC standard.
- Common Mode Protocol Tests
- Audio Tests
- Capability and Other Tests
- RCA S/PDIF
- TOSLINK optical S/PDIF
- I2S
- HDMI
6G HDMI/MHL Audio and Video Generator/Analyzer
Optimized for HDMI 2.0 and can be used in production lines to verify HDCP support
The SL-881 6G Handheld HDMI/MHL Audio and Video Generator (SL-881 AVG) is designed for testing source, sink,
or repeater devices, and is compliant to the latest HDMI® 2.0a and MHL® 3.x specifications. The SL-881
AVG can be used either to generate audio and video test patterns, or when equipped with optional features
operate as a generator/analyzer to validate HDMI 2.0a Compliance Test Specification (CTS) test IDs for
Status and Control Data Channel (SCDC) signals. With its 4.3 inch color touch screen display and user friendly
GUI, the SL-881 AVG is easy to use and is designed to expedite HDMI 2.0a- and MHL 3.x-compliant product
development.
SL-881 Key Features
UHD (6G, HDMI 2.0a) Audio and Video Pattern Generator
- Generates audio and video patterns for HDMI 2.0a and MHL 3.x, and analyzes video timings
- Features one HDMI input, two HDMI outputs, and one MHL micro-USB output
- Supports High Dynamic Range (HDR)
- Handheld size
- Rechargeable Li-Poly battery, up to 4-hour life-cycle
- 4.3 inch Color Touch Screen Display
- Selects, controls, and monitors testing
Optional Features
SCDC
- Verifies Scrambling setting for HDMI 2.0a devices and systems
- Verifies Clock Ratio setting for HDMI 2.0a devices and systems
- Monitors external DDC bus between source and sink devices
- Monitors input and output ports’ DDC bus activities
- Reads EDID from TV
- Edits EDID contents
- Programs EDID into HDMI input port
SL 309 Simplay CEC Explorer Development Tool
Recommended As Official Test Tool for HDMI ® Compliance Test Specification Version 1.4 for CEC and CDC Product No Longer Available
- Officially recommended test tool for CEC testing
- Only tool recommended for CDC
- Only test tool that combines CEC and CDC debugging, emulation, and “message visualization”
- Enables the CDC portion of HDMI Ethernet Channel testing
- Enables HDMI Audio Return Channel testing through the CEC messaging
- Helps develop, simulate and debug all aspects of CEC and CDC protocols
- Powerful GUI
- Allows custom test definitions through a scripting interface
CEC Explorer Version Features
HDMI CEC Compliance Test Suite (CTS)
- HDMI CTS: Fully compliant test cases (HDMI CEC CTS v1.4) that allow compliance testing on the DUT
- Summary Report for CTS Test: Itemizes each test case and records the test results
- HPD and 5V dialog to set and to read physical address
- CEC Command Message History: Captures all CEC commands and determines the interaction among different CEC devices on the same bus line
- Saves and loads CEC command message history including pulse graph
- CEC Command Pulse Graph: Shows each CEC command in digital waveform, along with timing analysis information
- Built-in CEC Checking Tool: Checks validity of any CEC command, highlights timing violation as well as incorrect CEC commands, shows meaning of operands
- Detailed CEC Command Logging: Allows software developers to examine the DUT behavior with other CEC devices with the capability to record all CEC commands from various CEC devices on the same bus line
- Pulse Editor: Allows timing modification to any CEC command so the developers can test the timing tolerance for specific CEC commands on a DUT
- Follower Auto Response Programming: Sets the tool to respond to certain CEC commands
- Customized Scripting Interface: Allows developers to come up with unique test cases for specific CEC testing requirements
- Sending all specified CEC commands via menue from any CEC logical address to any CEC logical adress
- Min, max, random and user-defined bit timing setting for start bit, bit timing, acknowledge and AOM
- Pass-through mode logs all CEC commands on the CEC bus without interaction
- Ethernet Connection: Uses either DHCP mode for easy connection within corporate network, or fixed IP mode for direct connection between Explorer and a PC
Ordering Information
To order contact Simplay Distributor(s)
iST – Integrated Service Technology
Email: taiwan-atc@istgroup.com
http://www.hdmiatc-taiwan.com/index_en.html
Weikeng International Co., Ltd
Contact: Lin Wu
Email: lin.wu@weikeng.com.cn
Shenzhen office telephone: +86-755-8294-3322 #335
http://www.weikeng.com.sg/
Simplay Labs, a Lattice Semiconductor company
https://www.simplaylabs.com/ProductsServices/OrderTools